Monday, May 16, 2022

Roasty toasty weekend.

Thursday and Friday I was out for the evenings, so I missed those two scorchers, but when I woke up Saturday it was still 76 inside despite having the windows open and fans on all night.  It is crazy to think that Monday I was debating turning the heat on, and by Thursday we were in the 80's, even in Sullivan.  


So the first thing I did Saturday was clean out my AC filter.  All things considered, it wasn't as bad as it has been in the past, though that month where it was frozen and didn't run the heat probably helped.


And turn it on.  My unit struggles to pull down the house a little, so I wanted to get it turned on before it got too hot.


Next up was washing the truck.  It is all nice and shiny.  Despite being a cheaper Turtle Wax cleaner, it did a decent job on the bug splats, and while it is odd to say, I really liked the smell.


While the truck was drying I sprayed the knotweed again.  The stuff I sprayed before had slowed in its growth and killed a handful of leaves, but it didn't kill it.  So it got another dose.  With how expensive the weed killer is, it will be expensive to spray it every weekend, but if it gets rid of it it is worth it.


Since I apparently forgot to hit the bypass on my water filter, the washing and spraying of weeds apparently used around 65 gallons of water.  


Next up was painting the truck.  The color was almost a perfect match.  From a distance you can't really see the touchup.  Even knowing it is there.


I was originally intending to only do the egregious scratches, since minor scrapes and stuff would be expected on an 11 year old truck.  

In the end I ended up doing pretty much all of them since the paint pens had a lot more coverage than I expected.  The drivers side cleaned up really nicely.  It had a ton of minor scrapes and whatnot from driving through thick brush.  


The worst part of the truck was the tailgate.  This got beat to hell by the guys at the quarry.  While some of the guys knew to only fill a side of the bucket of the loader, some didn't and just let whatever was past the end of my truck drop onto the ground.  Since the back of my truck is angled outward though, every rock that was a near miss on the bed scratched/chipped the paint on its way down.  This is what the side of it looked like.  


Above the handle was also really bad.  This is a before (left) and after (right) picture taken while doing it.  


The tailgate alone took me almost two hours to do, but it looks much better.  I didn't do the very bottom since that is rusted and the paint is bubbling anyways.


After finishing up the painting I started mowing.  As I went over to start, I noticed that I appear to have a leak in my plumbing.  The slab should not have been wet here.  I think it is related to the hose.  I turned the hose back off on the inside and we will see if it dries up.  If it does, I think I might not care and just turn the hose on when I need it.


Because I historically use the pushmower for more obnoxious stuff, I had the deck set to maximum.  It did cut quite a bit, but it kind of looks the same.  I might have to lower the deck on the pushmower a bit.  It is a quick adjust, so it isn't a big deal.  I only did about 3/4 of the front before I was getting eaten alive.  We are in the heart of black fly season.


Anx also came up to get a board ripped so he could install his AC, so I put him to work.  The cap from my truck has been removed.  I intend to sell it separately since it looks rough and I don't think it will increase the value of the truck especially since the back window is in rough shape and the back locks are clogged with salt from the winter.  


I have had the cap on there so long that the truck looks kind of odd without the cap on it now.


Sunday I didn't do much, dodging storms most of the day.  We got a couple of good ones.  I did get my bug zapper out and get it set up.


This is what the previous night looked like.  Look at the drip edge if it isn't clear.  Part of me wonders if this is because I wasn't able to put the dunks out this year (the chemical warfare I have done the last few years).  I didn't do that this year because where I used to put most of them wasn't on my property.  I would walk a quarter mile or so past the edge of my property before the creek split, and put them there, and let the current wash the chemicals downstream.  But that was all in clear view of the house next door, and is really close to where the person behind me is going to build.


I also went out for a bit between rain in the afternoon looking at path for the power lines so I can get started on that, and I just happened to see the fiber box on the pole.  The path for the power lines is a trainwreck, and will require massive amounts of tree removal just to run new lines.  This isn't counting the poles that they will have to drill through rock to put in.  They claim they will run it though, we shall see.  

Prepping the truck is well underway at this point.  I will need to put a second layer of paint and a layer of clearcoat on the repairs, and I still need to work on the interior.  I ran a couple of armor all wipes across the dash last week, but that is pretty much all I have done on the interior.  While I started looking at the power lines, I haven't really done anything with it yet.  

Summer projects:
  • Prep truck for trade in
  • Determine house plans (modular vs mobile vs stick)
  • Get my power service upgraded
  • Shed floor
  • Shed doors
  • Concrete shed supports
  • Anti-mouse the shed (seal it, maybe spray with pepper spray or something)
  • Eliminate pile of crap in the back yard.  
  • Level the side yard.  
  • Investigate retaining wall construction. 
  • Install windows in the shed.
  • Fix/sell the utility trailer.
  • Driveway round 5
  • Get building permit
  • Determine the future method of travel.  Build prototype?
  • Come up with garage plans
  • Clear walking trails on lot.  
  • Build a bridge over the creek

Thursday, May 12, 2022

Week prep work.

I haven't done a bunch of work during the week, but I did get a bunch of stuff ready.  
Everything for the car wash is ready.  I picked up a cheapo car wash kit, and you can see the paint pens on the right.  


I also got around to getting my hose hooked up.  It should be safe by this point.  We came close to freezing earlier in the week, but it wouldn't have stayed below freezing long enough to freeze the pipes.


I also decided that I am going to sell the cap separately.  I borrowed some picks from work, and while I had much better success with those, I concluded that after spending a whole evening on it and only getting the key to go halfway in that it wasn't worth the effort.

A couple of other odds and ends: with all the work in the field next door, the wood chuck is back in my yard.  He decided to hide in the rocks when I came home.  



My shoes are literally worn through.  I picked up a new cheap pair of sneakers for the time being.  


Work is giving away a bunch of stuff they had sitting around collecting dust.  I managed to snag some wire.  The orange is 16AWG and is what I use to tie things up, and 16AWG is good general purpose wire.  The two boxes are stranded 12AWG and are the same kind of stuff I used for solar experimentation. I know Dad was considering some solar stuff (he has my panel and has expressed interest in the batteries when I am not using them in the power center anymore) and this wire could be used to hook things up.  

Summer projects:
  • Prep truck for trade in
  • Determine house plans (modular vs mobile vs stick)
  • Get my power service upgraded
  • Shed floor
  • Shed doors
  • Concrete shed supports
  • Anti-mouse the shed (seal it, maybe spray with pepper spray or something)
  • Eliminate pile of crap in the back yard.  
  • Level the side yard.  
  • Investigate retaining wall construction. 
  • Install windows in the shed.
  • Fix/sell the utility trailer.
  • Driveway round 5
  • Get building permit
  • Determine the future method of travel.  Build prototype?
  • Come up with garage plans
  • Clear walking trails on lot.  
  • Build a bridge over the creek

Monday, May 9, 2022

A bunch of little things weekend.

I didn't do much during the week last week, but got the next batch of spring stuff done over the weekend.  

Saturday was actually kind of chilly, but I started by pulling out my utility trailer.  I got the light replaced that I smashed when we pushed it into place last year.  I am thinking I might finish the repaint job I started on it and then sell it.  With an 8' box on the new truck, its usefulness is pretty much over; it won't haul my tractor and to be honest I only used it maybe once last year (I don't actually remember the last time I used it).  


I also went and pulled out my driveway markers.  I will probably need to mow in the next couple of weeks.  


I left a couple of them out by the road to try to keep trucks from turning around in my driveway, the building season has started and they will be removing the weight limits from the road next week.


On Sunday I decided to try killing the knotweed when it starts.  Even if it doesn't kill it, it should pretty much halt its growth, or at least that is the hope.  I sprayed the side down by the creek, but didn't have enough weed killer.  I don't remember how well this stuff worked (it is probably in my blog somewhere from last year), but I got it because I couldn't get the regular glyphosate at Home Depot anymore.  I think I can still get it at Tractor Supply though.  At any rate, I need more.


After I ran out of week killer, I went through with my shears and removed everything that was at head height or below.  At the present moment I don't have a riding mower, so at least the first mowing will be with the push mower.  This way I don't have branches whacking me in the face.  


I still had some time left over after that so I decided to go up and work on the shed. The first joist I put the bracket on straight compared to the joist, since I wasn't able to pound the curl out of the outermost board, and I tried to pull it in with the screws, but that also failed.  


The second one I just put the bracket on it the way it was.  The third joist I wasn't able to get the joist to jack up properly, it looks like the former nails were pushing it around.  I will need to come up with a way to cut them off, since taking them out means removing the bottom pieces of siding which I don't like the sound of.  I am not sure I can get my grinder in there, and I don't think the cut off wheel on my Dremel will reach, but we will see.


The last thing I did was I tried to clean out the back locks on my cap.  I forgot to put the plastic covers on once and they got fully caked with salt.  Whether I sell the cap separately or trade it in with the truck, it would be nice if it was lockable.  My cheapo Harbor Freight pick set was not up to the task though.  The picks were too large and wouldn't go all the way to the back.  I think we have a better set here at work I might try to use.  If anyone knows a good way to clean salt out of a keyhole, I am all ears.


I also did a bit of housework on Sunday, some meat prep and grinding and stuff.  I also prepped the summer project list.  The utility trailer is on the list, which has been started.

Summer projects:
  • Prep truck for trade in
  • Determine house plans (modular vs mobile vs stick)
  • Get my power service upgraded
  • Shed floor
  • Shed doors
  • Concrete shed supports
  • Anti-mouse the shed (seal it, maybe spray with pepper spray or something)
  • Eliminate pile of crap in the back yard.  
  • Level the side yard.  
  • Investigate retaining wall construction. 
  • Install windows in the shed.
  • Fix/sell the utility trailer.
  • Driveway round 5
  • Get building permit
  • Determine the future method of travel.  Build prototype?
  • Come up with garage plans
  • Clear walking trails on lot.  
  • Build a bridge over the creek

Monday, May 2, 2022

Spring work

I spent most of the weekend getting ready for spring stuff. I started by giving my mower a tune up.  I didn't tune it up last year because I had just bought it the previous fall. 


That was apparently a mistake.  The oil was black.  More scary for me though was the fact that it calls for 20oz of oil and I only got 8oz out of it.  I ran it pretty hard last year apparently (I checked the oil when I bought it and it was fresh), and it burns a lot of oil for a mower that is only 3-4 years old.


The air filter is also pretty bad.  It probably could have used being replaced last year.  This was taken after I attempted to clean it out.  Inside the flanges were completely caked when I pulled it out  I didn't have a spare, so it will have to do until I get a new one.  I didn't pull the spark plug, but when I get the new air filter, I might get a spark plug for it too.  


I also sharpened the blade.  I couldn't find my grinder wrench, so I ended up using the cutoff wheel that was on it.  It didn't like it, but oh well. 


I also ran the snowblower out of gas.  Apparently when it is 65 out though, you can't just idle it.  It overheated (I assume, I can't think of any other reason it randomly died) when there was still a third of a tank in it.  I finished running it out Sunday.  The tank was mostly full since the last time it snowed I filled it and only got one or two passes at the top of the driveway before it broke the shear-pin and got wedged.

I also went and tested the chainsaw that I had just sharpened.  It cuts again, but I apparently did a pretty lousy job sharpening it, it still cuts far worse than it did before I hit the rock.  I might bring it with me next time I visit Barry or Dad to see if they can show me what I did wrong.  The trunk of the tree that fell down is on the ground though.  It fell where I expected it to, so I apparently cut the wedge and whatnot correctly.  It is the first tree I have ever cut down.  


I also pulled out my bike and started to give it a tune up, but there is something wrong with the ratchet shifters.  Last year I just oiled them, worked them a lot and they started (mostly) working again.  This year no such luck.  They aren't grabbing so I can't shift up, only down.  It might be time to bring it in and get them replaced.


Sunday I was pretty lazy.  I did my spring cleaning since it was warm enough that my windows were open.  I didn't really do much until early afternoon.  So instead I finished assembling the generator box.  It is pretty much done.  I left the spare T1-11 down in KY and only brought the pieces back, but I apparently never cut a bottom so I just used a chunk of MDF I had lying around.  All that is left is putting the screw eyes in so it can be attached and locked to the bumper of the camper and some sealing/reinforcement if it is necessary.  I might do those anyways just because I already have the parts.



I went to put the snowblower in the back, but it didn't fit (right in front of the snowshoes).  I might need to rearrange the carport a little to get things to fit, since the things like the power center framing is just sitting in front of the tractor.  Since I haven't picked up a new riding mower yet though I have plenty of space left.


I started to enumerate this summer's projects, but haven't completed it yet.

Thursday, April 28, 2022

New truck on order.

So I stopped in at the dealer yesterday, and the new truck is officially on order.  Since it is a custom order, it has all the features I wanted: 8ft box, extended gas tank, limited slip 4WD, 3.5L ecoboost engine, cruise control, split bench, tow package.  And a few extras that I wanted, like the drop in bedliner, 400W AC plugs so I don't need an inverter (and have to fight the fact that 12V outlets are only 10A at best these days).  The truck is a bit more than I wanted to pay, coming in at just under $50k including the dealer fees, but isn't a compromise (unless you consider the cost the compromise).


Here is the Ford website rendering of the truck.
The dealer said that the official Ford lead time is 3-6 months.  He also said his last two only took 6-8 weeks.  He claimed most of the longer lead time orders were the more expensive higher end trucks, like the XLT Lariat because of the sheer amount of electronics and stuff in them (think DVD players in the seats kind of stuff).  Mine is a pretty low end truck, so hopefully I will get mine on the low end of the estimate.  Six months is long enough that I would probably have to cancel my second big trip this year.

So I now will have had a truck from all the major brands: I started with a Chevy, replaced that with a Dodge, am currently driving a Toyota, and now am going to Ford.  I test drove one of their XLT models while I was there, and the 3.5L has a lot of pull, so I am not worried about it being able to tow the camper despite being notably smaller than the engine in my current truck.  It should in theory get much better mileage too; it is rated for 17/23, whereas my Toyota is 14/18 if I recall correctly.

In other news, I went up to Tractor Supply and got a sharpening kit for my saw.  I got it sharpened (I think), and will be trying it out this weekend.  I have never sharpened a saw before, so hopefully I did it right.  The file seemed a bit large to me, but I got the smaller set that was supposedly for my saw.



Monday, April 25, 2022

Power center out of the truck.

Friday I went and visited Barry and delivered the firewood, so that is all cleaned up at least (except for the trunk which I never cut down).  Saturday I went to a cookout and tried to make the chicken-bacon-ranch lasagna.  It tasted good, but was very very oily, and not all the lasagna noodles cooked properly.  I used no-bake since I thought the ranch would be runny.  So that recipe still needs some work.


The big task for the weekend was to pull the power center out of the truck.  I started by clearing out the spot in the carport where it goes.  The power center has been in the back of the truck long enough that I had commandeered its spot for something else.

Then it was time to start pulling.  Thankfully the tractor fired right up even after not starting for several months.  It made quick work of pulling it out.


I did a closer inspection as I disassembled it.  There was something that I found quite concerning; some of the wires were wearing through.  While it didn't come close to wearing all the way through the insulation, but it still wasn't something I expected to see.  I also noticed that some of the heatshrink came apart too.  


As I was disassembling it, I found out the hard way that the nut for my hex key set fell out.  Ugh.


But the back of the truck is now empty.  I will probably bring it to a car wash later this week.  I ordered some touch up paint for the truck and will be washing it before I apply it.


I got a preliminary trade in value on my truck of $11k.  I haven't been to the dealer yet though.  I did send an inquiry online to see what the wait time on a custom order F150 is right now, but haven't heard back yet.  Unfortunately the base price of the 4x4 just went up again, so I am up at 49k now.  I think it is more likely to go up then down though, so I will get rolling on that this week.