Thursday, April 21, 2022

Chopping wood

I was unusually motivated yesterday afternoon so I left work on time (instead of surfing internet for a couple of hours before leaving).  I chopped up the tree that fell on my shed yesterday.  It took a few extra pulls since the saw hadn't run in a year, but it fired up and ran really good...  Until I hit a rock anyways.  Now the chain needs sharpening.  I had the log propped up off the ground, but the saw went through it faster than I expected.  Oops.  Time to get a sharpening kit.


All the logs are cut up though and I carried them down to the carport.  I didn't really want to drive the tractor up there since it would leave ruts whose depth would be measured in feet right now.  Even just walking up there my feet were sinking several inches in spots.


In addition, my camper upgrades and things that I wrecked on the trip arrived.  I will bring them down next time.


I need to get up to the Ford dealer, preferably this week, so I will hopefully be pulling the power center out of my truck this week.  It is nice to have daylight after work.

Tuesday, April 19, 2022

Weekend update.

I did some stuff over the weekend other than sorting through pictures.  I poked around in my truck trying to find where this piece goes, though I couldn't find it.  


I also got out and walked around my lot a bit before the snow started on Saturday.  We must have gotten a really nasty windstorm at some point while I was gone.  I noticed that one of my dead pines in the back gave away.


Another dead tree was a near miss on my utility trailer.  


I also had a tree came down and hit the shed.



Fortunately, there is no serious damage, just some minor damage to the doors.  

Stuff looks like it got jostled around, and the pile of spare wood fell over, but I didn't see any damage inside.  


A couple of other notes: the crack in my slab has gotten larger.  


Apparently a bird thought it would be cool to build a nest on my bike.  Grrrr


A little surprising too since it is literally only a couple of feet away from another nest.  I didn't think they would build that close to each other.  Or perhaps that is why it was never finished.

Sunday the weather was kind of crappy, so I went out and looked at cars in between short bursts of sleet.  I was curious about whether SUVs would be big enough inside for a van camper, since they could also replace my truck.  I didn't meet with much success.  The only ones I thought I could sit up in were the Honda Odyssey (a minivan and not really a candidate), and the Subaru Ascent seemed like it might be feasible.  The problem with most of them were they were too short in the back, meaning I can't sit up in them in the back.  Looks like a pickup is the way to go for my next vehicle at least.  I have been keeping an eye on F-150 prices, and they seem to be obnoxiously volatile.  I can price out a truck one week and it varies a few grand from week to week.

We got a bunch more snow last night, and apparently my truck is sick of it too.  The wiper broke off when I turned them on.   


I haven't really gotten around to doing any work on any of the projects, though replacing the shed doors will definitely make the list for this summer.

Monday, April 18, 2022

GoPro Footage from trip and review.

While I was on the trip, you may have noticed several pictures where I had a GoPro mounted to the top of my truck.  I used this on the road to take pictures as I was driving, which if you have gone through the pictures in the last post, you noticed I am not terribly great at snapping photos while moving 60mph.  

I finally sorted through and uploaded the photos from the GoPro.  I have to say, building the time lapse video was a bigger pain than I expected.  I expected to be able to download something from the internet and just plop in the pictures and tell it go.  And while I did that, the software was a trial and the output resolution was limited to standard definition, so the videos aren't HD.  I also picked too large an interval for the photos.  I used one picture every 5s resulting in a 150x speedup.  That was a bit much, and it can be hard to tell what is going on in the video as a result.  I think they still convey what I wanted to convey though.  If I continue to do this, I will definitely need to iron out the process beforehand.  Sorting through tens of thousands of photos was kind of a pain too, so I need to keep that in mind going forward.  Maybe I just bump it to 4k and use the time lapse video on the camera (similar to the video from Palo Duro Canyon).

Here is the drive to Texas.  I lumped both days together since there really wasn't much there.

Here is the scenic drive through Palo Duro Canyon.

Here is the drive to Sunset reef in New Mexico.

Here is the drive to Rainbow Ranch.  

It failed to connect when I was driving to Prescott National Forest, and I didn't fix it.  The next GoPro usage was on the scenic drive from Sedona to Jerome.  

I also ran it on my way back from the failed excursion to the ghost town.

Next up is the drive to Williams, where I stayed near the Grand Canyon.

I also used it when I traveled to the northern excursions, which included Horseshoe Bend, Glen Canyon Dam, the Chains overlook (other side of the dam), Wahweap overlook (which had the views to Lake Powell), and Vermilion Cliffs National Monument.
Wahweap I didn't save anything from it.

I fired it up after the Desert View scenic drive, though I apparently stopped for gas (shocker) and for some reason turned it off (probably with my butt) and didn't turn it back on afterwards.

Lastly was the drive home.  I split the drive home into a few major chunks.  The video of the entire first day is at: https://photos.app.goo.gl/FwcA4NtKRSYJEDg27

The first chunk was 89A in Arizona.  

Next up was Monument Valley.

Then the Utah part of the trip.

Part of Utah was Moab (where Arches National Park is located). 

Just some generic I70 photos from Utah and Colorado.  I stayed overnight in Colorado at a rest area.

Colorado (second day).  I didn't run the GoPro for Kansas (mostly because the eastern end of Colorado is boring enough, I didn't need to relive Kansas too).

Here is my review/thoughts on the GoPro.

Pros: 
+ Rugged.  Cameras that can be left outdoors in the snow and rain (and dust in my case) are uncommon.  It was on top of my truck in the snow in the Grand Canyon, it was running in the rain for the trip to TX, it survived the dust storm and the dust trip back from the Ghost Town, and it got through all that unscathed.
+ While it doesn't use standard camera mounts, it has a fairly well developed ecosystem, and most kinds of mounts and stuff are widely available.  I had no problems finding the needed adapters to build my car mount.
+ Likewise, despite feeling like cheap plastic, I had no issues with the mounts holding up to >80mph with headwind.  They are stronger than they look.
+ When it works (see my cons about their app) their app is actually really nice and gives full control.
+ The image stabilization when doing video is top notch.
+ The sun being in the video didn't immediately blow the whole frame out.

Cons: 
- Picture quality is poor.  Like possibly worse than my circa 2011 Moto X smartphone poor.  The images are also horribly overcompressed.  I did not see a setting to change this without changing to RAW mode, which would have meant postprocessing all the pictures.  I might have do that next time and put Heather to work doing batch exports.
- Likewise their lens correction post processing is either non-existent or exceptionally bad.  Edges of photos are badly warped, and not just the corners.  It is basically like they think everyone loves fisheye effect photos and there is no way that I found to change/fix it.
- Video quality results were better than the photos, but still not great.  It still takes worse video than my phone, despite being ~3 years newer than my phone.
- This isn't atypical for this kind of thing because of the CPU requirements to do it well, but video compression is poor.  The 5 minute Palo Duro Canyon video was over 3GB.  One pass through Handbrake and it came down to ~725MB.
- In low light it tried too hard to overexpose the image.  Since mine was mounted to a moving vehicle, this meant anything at or after sunset was worthless unless the vehicle was stopped.  This looked like a result of poor light metering, it looks like it used whole frame average light metering, instead of the more typical center-weighted average where the edges are allowed to be dark.
- Battery life is terrible.  Just going in and playing with the settings for a few minutes drained the battery down to ~85%.  Using a photo interval for a half hour drained most of the battery.
- Some of the settings are in weird places.  Like interval photos are under time lapse video, not under photo mode.
- Doesn't come with an external battery charger.
- Expensive in the world of point and shoot cameras.  Especially if you include the mounts and stuff since they aren't standard.
- Their app needs work.  The interface in the app is quite nice as noted above.  It frequently wouldn't connect to my GoPro though (I had a roughly 50% success rate).  Likewise the "camera found" thing was wrong a lot of the time (a fair chunk of my successful connections it told me the camera couldn't be found).  
- Their live preview in the app only worked the first time you connected since it was powered on.  After that, it would never work again until the GoPro power was cycled.
- Even when the app did connect, it takes minutes to make that connection.  I don't know what kind of handshaking they are doing, but that is bad, even in the slow embedded world.  That is why a lot of the videos of driving on my trip start with me already on the interstate, because it took that long to connect.

Other Thoughts:
If I am being honest, there really aren't many good alternatives to a GoPro (that I know of anyways).  The photo quality, while surprisingly poor for 2021 (when the Hero9 Black was released), isn't so bad that the pictures can't be viewed on a monitor.  I can still see poor compression artifacts even zoomed out so that the picture fits on my screen (viewing it at roughly 20%) , but I also know to look for them.  You just can't zoom in to read signs and stuff like that.  
If you are using it to take outdoor action videos (which is their niche) it does that at acceptable quality; the Palo Duro Canyon video was nice and smooth and quite watchable.  If you are looking for a replacement for a point and shoot and are looking for something rugged/waterproof, I would not recommend it.  If all you have is a not-top-of-the-line phone and want something to take skiing videos or whatever, it does that pretty well.  

In my case, I was looking for something rugged to take scenic photos.  My use case doesn't fit into their niche, and it didn't do it well.  I pretty clearly overestimated the capabilities of the GoPro.  For me, it feels like it was not the right tool for the job.  I think I would have been better suited getting a waterproof digital camera instead of a GoPro, similar to what I rented for scuba diving.  Given how expensive the GoPro is, that likely would have been cheaper too.

I will post my update from the weekend tomorrow.

Thursday, April 14, 2022

Back to the real world. Very long vacation post.

I returned from my trip last weekend.  Since then, I have been sorting pictures and stitching panorama shots and then re-stitching them because I did them wrong the first time.  I haven't finished going through the stuff from the GoPro, but the pictures from the big camera and my phone are all done.  Just as a word of caution to those perusing the photos: I took borderline too many pictures, literally in the thousands, and that doesn't include the GoPro stuff.  They aren't annotated/captioned yet, that will be in the near future as well.

I did the pictures from this trip slightly differently than I did the trip to South Dakota.  The main difference was what got put in the albums.  The South Dakota trip I pulled out all the pictures of the camper happenings and campgrounds into separate albums.  Here they are intermingled with the pictures of the area they are associated.  I did this to help keep them straight, since I had 5 different campsites on this trip, whereas in South Dakota there was only one campground.  I also didn't break out every attraction into its own album (though that was mostly due to laziness), and just broke them down by day.  That was partly due to laziness, and partly because of the sheer number of albums that would have created.  The day I drove north of the Canyon would have ended up with a half dozen albums.  Not sure I like the new format better.  If you have a preference one way or the other, feel free to let me know.

Because of how long this is, I am not planning on putting sample pictures in from each album.

The drive to KY.  This trip was kind of cursed by snow.  It snowed in NH right before I left, I drove through a blizzard to get to KY, I bailed on TX a day early because of snow/sleet/tornadoes, It snowed in NM, and it snowed on me in AZ.


These are from the initial drive to Texas, the first stop.

The stop in Texas was Palo Duro Canyon.  Despite paling in comparison to the Grand Canyon, this was a good way to whet my appetite for things to come.  It was a nice scenic drive, though because of leaving Texas early, I didn't get to do any hikes.  I took a video of the entire scenic loop with the GoPro that isn't posted yet.  The GoPro footage is next on the list of things to do.

After that, it was off to NM.  I stayed at Sunset Reef Campground, which is a free campground (first come first serve).  I got there early enough in the day I got one of the official spots, though I didn't use the picnic table or anything that was there.  They had toilets there, but they were on the other corner of the campgrounds, so I didn't use them either.

Because I left Texas early, I had an extra day in NM.  The first day I explored the park and poked around White's City.

The second day was the main NM attractions.  I had reservations at Carlsbad Caverns in the morning.  They were gargantuan compared to the other cave systems I have looked at.  

The afternoon was White Sands.  Despite my GPS sending me into Alamogordo instead of the park, I still got to spend a good chunk of the afternoon there.  The white sand is very different; it stiffens up, almost like clay. 

The route I took to get to the White Sands was a rather dull very long drive south through Texas.  The way back I drove through the Lincoln National Forest, which was a much prettier drive.  I got to watch the sunset over Alamogordo too which was nice.

The next trip was to Arizona.  In hindsight, I should have split the White Sands excursion out into its own destination, since it might have been closer to the campsite in Arizona (Rainbow Ranch) than the campsite in New Mexico.  The campsite in Arizona was Rainbow Ranch.  It is basically some guy who owns a field and had a few tents and an open spot for RVs.  Everything was spaced out though, which is nice.  It was the closest place I could find to the Petrified forest.

The next day was the Painted Desert and Petrified Forest.  While in terms of acreage the park is huge, the amount of stuff to do there was actually quite small.  I had been worried when I planned the trip that a day wasn't enough, but I got back to the camper early afternoon.  The painted desert wasn't bad, but the petrified forest pretty much had one trail worthwhile and that was it.  The petrified wood is very pretty though.  

My next stop was in the Prescott National Forest.  I stayed at the 50's Diner, Motel and RV park.  The place was perhaps a bit rough for accommodations, but was actually the only level RV spot I encountered on the whole trip.  
This was the RV Park.  I am not sure why I uploaded them separately.  I might fix this and update the post.

My first excursion there was Montezuma Castle National Monument.  It was a quick short thing I could after getting the camper set up.  I had hoped that they would let you actually go inside, but they stopped doing that many years ago.  Only rangers and authorized personnel are still allowed in.  

I capped off that evening with a scenic drive that Mike recommended.  I went up through Red Rock Canyon into Sedona and down to Jerome.  Sedona is a gorgeous town.  Jerome actually reminded me a lot of driving around in France.  The town is built into the hillside and is basically a bunch of switchbacks.

The next day was Arcosanti.  It is supposed to be an archology exhibit about urban development, but was disappointing at best.  The tour guide didn't know much about architecture, and I was hoping to see either some innovative architecture or at least some interesting designs around issues like water, but it didn't have any of that.  

After that disappointment, I had my sights set on Tip Top Ghost town.  Unfortunately for me, I didn't do enough research, and while there is a trail to get there that for some reason Google thinks you can drive on, it isn't actually accessible by car.  I would have had a blast with a 4-wheeler getting there, but I was constantly worried about breaking my truck since I was basically rock crawling.  I turned around before I got there.  On the way out, I did take GoPro footage, which will be posted later.  

The next day I headed for the Grand Canyon.  Since it was only a couple of hours away, I had planned to drop the camper and continue on to the Western Canyon and do the skywalk, but I got intercepted by a dust storm so thick I couldn't see the end of my hood at times and turned around pretty quickly once I realized that even if I made it through the dust storm unscathed, I lost so much time in it that I wouldn't have made it there before sunset.

The next day brought more destructive weather.  I woke up to several inches of snow.  But I drove all the way to the Grand Canyon, so I was going to see something.  It is worth noting that weather ended up cancelling the western canyon as mentioned above, and this snow day ended up cancelling my Kaibab trail hike down into the canyon (which I was only questionably physically fit enough to do).

After some fun playing with the heat so the pipes didn't freeze, the next day was actually really nice.  I hiked the rim trail.  Well, most of it.  The last few miles I used the shuttles because my feet started to hurt.  This is where the bulk of the pictures of the Grand Canyon are.

The following day I did some other nearby excursions so I didn't get Grand Canyon'd out.  I went north.  I originally planned a scenic drive of the north rim, but I didn't do my research and the north rim doesn't open until May.  Oops.  I still got a bunch of other places though.  The famous Horseshoe Bend, Glen Canyon Dam, Vermillion Cliffs National Monument and the (infamous?) Lake Powell.  I also resupplied since Page had a Walmart.

Next up was the eastern portion of the canyon and Desert View scenic drive.  The tower at the end wasn't open, which made me a little sad, but the walkway with the view was.  That isn't a whole day though, so I also hit up a couple of other local excursions.  These included Wupatki National Monument and Sunset Crater Volcano National Monument.  It is surprising how quickly you can go from the reds of the painted desert to jet black volcanic.  It provided some nice contrast.

The last day was a planned down day.  The pictures of the Grand Canyon Railway RV park are in this album.  I rode the steam locomotive into the canyon (it only very briefly went by the Grand Canyon, which was a bit disappointing).  While it was a comfortable and relaxing way to end my vacation, I don't think it was worth the money (while first class, my ticket was $175).  You only have a few hours in the Grand Canyon that way.  I bought lunch and ate it just staring into the canyon.

Then came the trip back.  I planned my route to go north instead of coming back across New Mexico, Texas, and Oklahoma.  Instead, I went north, got to drive through Monument Valley.  While it wasn't planned, it also took me through Moab, Utah and right next to Arches National Park.  I didn't stop though.  I picked up I70 in Utah, and headed east through Colorado and Kansas.  Both routes went through Missouri and Illinois.  Colorado is gorgeous to drive through, at least until Denver (whereupon it turns into plains).  Kansas had apparently burned down right before I went through, there was still tons of smoke and orange glow from embers everywhere. I was rolling the entire time with the GoPro, which will be uploaded soonish.  I stayed just outside of Denver the first night and just outside of Topeka Kansas the second night.  I got back to Kentucky late Wednesday.  I was working half-ish days from the camper.

And the final drive back to New Hampshire.

All in all, the drive was 8,325 miles.  The route I take from New Hampshire to Kentucky is 950 miles each way so 1,900 of those 8,325 miles are just the trip to KY from NH and back.  One of the things that greatly contributed to this was the fact that I stayed in Williams for the Grand Canyon portion, but Williams is about 75 miles from the Grand Canyon Park.  This was mostly because of availability: I originally wanted to stay in the park but didn't make my reservations early enough.  There aren't a lot of towns nearby either.  I didn't find any availability in Tusayan which is near the park either, and Williams is the next nearest town.  So every day in the Grand Canyon (5 days) was 150 miles of driving just to get to and from the park.  Better planning could have cut probably 1,000 miles out of that total.

Due to the current gas prices (I paid over $5 a gallon on several occasions), I also have gone back and looked at the cost of the trip, which was higher than originally anticipated (not a good thing with a looming truck and house purchase).  Here are the highlights: 
  • Total: $5908
  • Gas: $3147 and I drove a total of 8325 miles
  • Food (quick foods at gas stations and the like): $190
  • Restaurants: $101
  • Lodging: $635 of which $400 was the resort at the Grand Canyon
Given the gas prices, I also did some quick math on what it would have cost if I hadn't taken the trailer and just slept in the truck (put a cot, toilet and kitchenette in the back of the truck).  I paid $635 for the various RV parks.  Staying in hotels came in at $878, and I didn't just pick the cheapest hotel in each area either (I did a quick first pass and picked the hotel I would have started with).  The gas savings not towing the trailer were estimated to be $1047.  All this is in the spreadsheet that can be found at https://docs.google.com/spreadsheets/d/1eBM_-sIyDB_gvvagUgAS7QvrY1ycu-Aq0DfOmEbSqq4/edit?usp=sharing. Something to consider as I go to buy a new truck though, since towing the camper is the main driver for getting the biggest engine.  The camper is a very nice luxury to have and opens a lot of doors, but it isn't a cheap one it appears.

One other note on gas: in most states, 87 octane is "regular".  I noticed when I got to Texas that "regular" was only 86 octane.  This problem continued to get worse when I was in Utah where I even saw "regular" as 84 octane.  While octane and gas mileage aren't directly related (octane rates the stability of the gas, not the energy density which is the same across all grades) lower octane can, if it burns poorly enough, result in lower gas mileage, so in Utah and Colorado I ran mid-grade gasoline which was 87 octane.  So while gas in Utah looks cheap (their "regular" was among the cheapest on the trip) I ended up using mid grade which made it pretty average in terms of gas costs.  https://www.eia.gov/energyexplained/gasoline/octane-in-depth.php outlines what I am talking about.

So Oklahoma gets a bad rap as far as driving through it, and while its scenery was probably the most dull, I would have to say New Mexico was the worst state as far as driving goes.  The roads in NM are atrocious, gas stations can be hard to find, there is seemingly always a 50mph headwind, and the scenery is only a small step above Oklahoma.  Texas and Kansas were both pretty bad as well, but at least Kansas and Oklahoma had good roads.  I also didn't have wind problems in Oklahoma, but most of my driving through Oklahoma was at night, so that may not be fair.

Wednesday, March 9, 2022

Truck is ready.

The truck went through inspection yesterday.  Bob was nice and passed it, though it should have technically failed with the cap on (the cap doesn't bring out the third light).  The damage wasn't too bad either, only a few hundred (though I supplied the parts, which were several hundred).  He fixed my TPMS light as well while he replaced the tires.  Apparently you can't change rims on a Toyota without reprogramming the computer.  Another quality Toyota design.  The truck has all new tires on it for the trip.


It has a bumper again too.  It is so shiny.  Some of the clips for the plastic were missing, so I will have to keep an eye on it.  But at least the truck doesn't give you tetanus just from looking at it anymore. 

Snow Coverage: Just snowbanks are left.  We might get a couple of inches today, but it won't last long.  

This will probably be my last post before I head to KY.

Monday, March 7, 2022

Snowblower fixed, truck ready for inspection.

I got the new drives for my Drobo last week.  Turns out the issue was not the drive (or at least not only the drive, since neither of these surprisingly well packed drives worked.  Neither would spin up.  This would imply it is the Drobo that is the problem not the drive.


A couple of other things I did during the week.  Jess wanted to try some stuff with ground chicken, so I picked some up and ground it.  


I also played around a little with the GoPro.  I figured out how to use its time lapse video mode.  I would rather set it to take pictures on an interval and then turn it into a video myself, but I didn't see a way to do that.  That would allow me to take full resolution stills, instead of just grabbing a 1920x1080 video frame (it will do 4K, but I would need to make sure the microSD is large enough), and it would allow me to manually remove things like being stopped at a rest area, or the umpteenth gas stop because my truck sucks.  It would also allow me to concatenate the two days of driving into a single video.  This is such a basic feature I really expected it to be there.  All the stuff online just says use the time lapse video mode.  Another problem with video mode is battery life.  I got a big block battery for it, assuming that would be enough for it to wake up every couple of seconds take a picture and go back to sleep.  In time lapse video mode, the GoPro never sleeps though, so that extended battery probably won't last a day.  It is something I will definitely have to keep an eye on, and I might test it on the trip down to KY.  


Saturday I didn't really do too much.  I relaxed and sorted through a bunch of stuff on the Drobo, since it is now clear that it is at least part of the problem.  I also went and picked up a stationary bike, though I didn't get it set up, I had to clear out the corner first.

Sunday I got the bike set up.  It is probably too little too late for this trip, but hiking down into the canyon and back out can kick your butt even if you are ready for it, which I am definitely not.  It is small enough to fit in front of the TV when I am using it.  


And it folds up nicely in the corner when I am not.  


It had been above freezing for over a day at this point, so I gave the heat pump another shot.  It sounded really really awful and screeched when it first turned on, but it did turn on and it was working.  The second time it cycled on it sounded normal, so I got lucky and it was just frozen, I didn't burn up the motor.  This is good since heating with the space heaters really kind of sucked.  It turned out their "thermostat" was actually just a duty cycle, not based on temperature, so I had to look up the temperature before I went to bed and set them for that, which would make it warm when I went to bed, and if I guessed wrong, either I would wake up sweating or freezing.  Both had occurred in the previous week.


The big project on Sunday was getting the truck ready for inspection.  I had intended to swap my back tires to the new rims, but it turns out one of them wasn't holding air anymore, so I only got one swapped back and I will have Bob's take a look at it.  The tires are in the back of the truck now, as is the new bumper.  


While I was swapping around the tires, I also bent my fender back out.  It got caved in a little, and it is pretty close to back where it belongs. 


Unfortunately while I was crawling around under the truck, my cheapo flanel decided it had enough.  since you can't get them at this point (all the stores are in summer mode already) I might just put a patch on it for the rest of the season.  I think I still have some iron on patch somewhere.


I also went up to the shed.  The roof is mostly cleared off, so I moved the boards and stuff out of the way.


After that I decided to fix my snowblower.  I started beating on it to get the auger free, but there is a reason that screwdrivers say "do not use as a prybar or chisel" on them.  This was one of my nice big ones too.


I got the chunk of shear pins out though.


Turns out there was also a big rock in the way, which is probably what caused the issues in the first place.  


The snowblower is fixed.


I also found out something interesting about the NAS I bought from Mike: it has a "recycle bin" built into it that doesn't integrate with the Windows.  The way it allocates space from this is that it takes space out of the total size of the array, so the array looked like it was only 12.8TB when I bought it, but when I found this out and deleted the recycle bin files, all of a sudden the mapped drive was 15.8TB.  So that means most of the work I did during the week removing stuff since it wouldn't have fit was unnecessary and it means I have a bunch of stuff to download next time I visit someone with a big library.  Oh well.  The large transfer off the Drobo has begun though. And yes, it was warm enough Sunday that my window is open.  One positive note: I never saw above 40MB/s on my old tower transferring to/from the Drobo, but it is holding steady at full speed Gigabit, even while playing media from it at the same time.


Snow coverage: about 50%.


It is pretty unlikely I will work on the projects at all this week since I will be preparing for my trip at the end of the week.

Monday, February 28, 2022

Breaking things.

This was Friday.  I worked from home.  I didn't take an exact measurement, but it was somewhere between 6 and 8 inches.  


Saturday was cleanup day.  I started it off by breaking my snowblower.  This one is not as easy to fix/workaround.  What it looks like happened was the shear pin broke, but instead of falling out, it got wedged in between the inner shaft and the auger.  The end result is that part of the shear pin is still in there, but I can't move the auger to get it out.  I am not sure how to fix this without disassembling the whole front end of the snowblower and beating on it.  


I ended up using the tractor for the whole driveway.  It is kind of a pain to do, but I have at least done it before.  The tractor isn't heavy enough to push it the whole length of the driveway, so I have to do 10 feet at a time, and the driveway is three to four passes wide, push that down to the apron (with the bucket, not the blade, the blade will destroy the driveway), and then push it off to the side afterwards.  I did the bottom thirty or so feet and then decided that my truck can drive over it so I didn't care enough to do the rest.

Things were melting surprisingly quick on Saturday.  The carport was already starting to shed the snow by the afternoon when I finished clearing.  I am mildly curious why the front slides so much faster than the back; the back should get more sun.  


Sunday I did get up to the shed and out for a bit.  I pulled out the stuff I am bringing to KY.  


I also took a peek at the coverings I installed.  they didn't blow away which is good.  I will leave them there until the snow slides off the roof.  

I contemplated moving them and working on the shed floor, but I didn't get motivated enough.  I also had a drive in my Drobo die since things always break in bunches.  Ugh.  So I spent a good chunk of Sunday ordering new drives and sorting through the stuff on the NAS I bought from Mike, since it didn't have enough free space to blanket copy everything over from the Drobo.  He has a bunch of movies and stuff on there that I don't have, so I am poaching some of the data before I wipe it.

I also pulled out the new toys that I got a while ago.  I got a grinder and a cheese grater attachment.  They are cheap knock offs, but appeared to work.  The meat grinder doesn't fit well on the mixer and wobbles a bit, but it worked fine.  There is a little bit of waste (meat that doesn't get ground), but not nearly as bad as the reviews made it it sound like.


The cheese grater has a pretty significant flaw.  You can't actually put a block of cheese in it, I had to chop it in half.  


That turned out to be a good thing since I was running the machine at full speed.  It grated the half block of cheese in seconds before I could slow it down.  So the burgers were very cheesy.  It is also worth noting that at full speed the cheese gets sprayed out everywhere.  The grater actually had more waste than the grinder, which was a bit disappointing, but might be because of going crazy at the beginning.  I ran them through the dishwasher (no attachments I found are actually dishwasher safe) and nothing bad happened which is also a plus.


One of the other things I did on Sunday while I was waiting for files to move around was I took the GoPro out for a ride to see if it would handle being on top of the truck.  I added a wire looped around the mounting just in case bad things happened.  The magnet I am using has a 90lb pull strength (for a < 5lb camera), but that doesn't necessarily translate to torque strength from air drag at 70mph.  It also doesn't mean that the molded plastic mounting hardware could take it.  


The extra wire was unnecessary.  Everything worked as hoped; it didn't move and is still pointed correctly.  I may or may not have been going 80 on route 10, and there was swirling winds, so it should handle the slower speeds I travel with the camper with aplomb.  Now I just need to learn how to use the GoPro.


As you might expect, snow coverage is back up to 100%.  Tomorrow is March, so I can get the ball rolling on getting my new tires and registration and all my birthday tax from the state.

Thursday, February 24, 2022

House is about to get a lot colder.

UPDATE - See bottom

Yesterday was definitely an interesting day.  I got my national park pass.  Almost everything for the trip is set up at this point.


I also got the GoPro mount redone with actual bolts.  It is reasonably stiff now, so it is ready to get stuck on the truck and tested, see if that 90lb pull magnet is strong enough pull to withstand the lateral torque of wind resistance.  


Right before I went to bed last night, my heat pump decided it has had enough.  I can still hear the relays clicking on and all that, but the fan never starts.  It is possible that the fan is just frozen in; this unit historically has had exceptionally poor drainage and we went from 50 and raining to below freezing in less than 12 hours.  I did hear the fan blades scraping on ice which is the loud noise it makes in the winter before it stopped completely, so it might have just finally cooked the fan motor.  Unfortunately, we have run out of warm weather for a little bit, so if it is frozen in, it will stay that way for a while.  


The good news is that we are close enough to spring I can just heat the place with space heaters.  I have two.  I set one up this morning, since it was very chilly in the house this morning.  I also still have a window unit AC in the shed that I can put in for the summer.  


That heat pump was really expensive (I paid $700 for it) and they are $1100 now, which I won't pay to replace it for at most a year.  Unfortunately since wall units aren't standardized for size, I can't just pick up a cheap LG unit or anything, they won't fit.  Most of the small heat pump market has gone to mini-splits, wall mounted units are largely a thing of the past at this point, so my odds of finding a replacement are slim.  I will just have a higher heating bill next winter if I am not in the new house by then.

Today's snow coverage: down to 10%.  I haven't gone up to check if the side of the shed has melted off, but it almost assuredly has.  I am going to be running around at lunch, I might stop up and check and get it covered.


UPDATE - I went up at lunch and saw the Fedex guy.  The tires for my truck have arrived.  


One of the reasons I went up at lunch was to cover the side of the shed.  The first major chunk is covered.  The snow moves in tonight.  I have seen everywhere from 6-8" to 12-16".  It is unfortunate that I never fixed my snowblower, it will get at least one more workout this season.


The other reason I went up is that since the space heaters have an analog temperature setting, I didn't know what they were set for when I set them up this morning.  Turns out they were set for about 45ish.  That is a bit too chilly even for me, so I cranked them up a bit. It was up in the 50s when I went back to work.